headerphoto

Volume 39, No 4, 2017, Pages 487-494


Download full text in PDF

Wear Analysis of Top Piston Ring to Reduce Top Ring Reversal Bore Wear

Authors:

P. Ilanthirayan*, S. Mohanraj, M. Kalayarasan

DOI: 10.24874/ti.2017.39.04.08

Abstract:

The piston rings are the most important part in engine which controls the lubricating oil consumption and blowby of the gases. The lubricating film of oil is provided to seal of gases towards crankcase and also to give smooth friction free translatory motion between rings and liner. Of the three rings present top ring is more crucial as it does the main work of restricting gases downwards the crankcase. Boundary lubrication is present at the Top dead centre (TDC) and Bottom dead centre (BDC) of the liner surface. In addition to this, top ring is exposed to high temperature gases which makes the oil present near the top ring to get evaporated and decreasing its viscosity, making metal-metal contact most of the time. Due to this at TDC, excess wear happens on the liner which is termed as Top ring reversal bore wear. The wear rate depends upon many parameters such as lubrication condition, viscosity index, contact type, normal forces acting on ring, geometry of ring face, surface roughness, material property. The present work explores the wear depth for different geometries of barrel ring using Finite Element model with the help of Archard wear law and the same is validated through experimentation. The study reveals that Asymmetric barrel rings have less contact pressure which in turn reduces the wear at Top dead centre.

Keywords:

Top ring, Wear depth, Boundary lubrication, Skewed barrel ring, Archard Law



Last Edition


tribology

Volume 43
Number 2
June 2021


Crossref logo





Announcements


TiI news RSS 2.0

Table of contents